CDA 955 Nickel-Aluminum Bronze Bars and Tubing
CDA 955 Nickel-Aluminum Bronze Provides Strength Against Corrosion
Nickel-aluminum bronze is an extra-tough, corrosion-resistant alloy.
Lawton AIABar is a CDA 955 bronze supplier providing nickel-aluminum bronze bars and tubing to manufacturers throughout Wisconsin and nationwide. CDA 955 nickel-aluminum bronze has characteristics similar to CDA 954 aluminum bronze, with a higher nickel content of approximately 1.5-3.5%. This added nickel contributes to the alloy’s high strength and durability.
CDA 955 offers strong resistance to corrosion and heat, making it well-suited for marine equipment, gear hardware and other heavy-duty components. Nickel-aluminum bronze pipes and tubes are weldable, machinable and responsive to heat treatment for additional strength.
Value-Added CNC Services for CDA 955 Bronze
Lawton AIABar supplies C95500 nickel-aluminum bronze bars, tubes and pipes as bulk stock or machined components. Our Wisconsin CNC machining capabilities produce custom bronze parts built to your specifications.
Available machining services include:
- Cut to length, production, and short runs
- Finish machined components
- Rough turning and boring
- Pre-machined and machine-complete
Our experienced bronze fabricators use advanced machining equipment to produce CDA 955 nickel-aluminum bronze components for demanding industrial applications.
CDA 955 Nickel-Aluminum Bronze
Chemical Composition
Copper
Iron
Alum
Nickel
Manganese
78%
3-5%
10-11.5%
3-5.5%
3.5%
Mechanical Properties
Tensile
Yield
Elongation
95 ksi
42 ksi
10%
Physical Properties |
||
| Imperial | Metric | |
| Liquid Melting Point | 1930°F | 1054°C |
| Solid Melting Point | 1900°F | 1038°C |
| Density | 0.272 lb/in3 at 68°F | 7.53 gm/cm3 @ 20°C |
| Specific Gravity | 7.530 | 7.53 |
| Thermal Conductivity | 24.20 Btu · ft/(hr · ft2 · °F) @ 68°F | 41.9 W/m · °K @ 20°C |
| Electrical Conductivity | 8% IACS @ 68°F | 0.049 MegaSiemens/cm@ 20°C |
| Electrical Resistivity | 122.80 ohms-cmil/ft @ 68°F | 20.41 microhm-cm @ 20°C |
| Coefficient of Thermal Expansion | 9 · 10-6 per °F (68-572°F) | 16.2 · 10-6 per °C (20°-300° C) |
| Modulus of Elasticity in Tension | 16,000 ksi | 110,000 MPa |
| Specific Heat Capacity | 0.10 Btu/lb/°F @ 68°F | 419.0 J/kg · °K @ 293°K |
C95500 Nickel-Aluminum Bronze Stock Material
As a CDA 955 bronze supplier, Lawton AIABar provides nickel-aluminum bronze stock in multiple forms for machining, fabrication and component production.
Bar, Rounds and Rods
Our CDA 955 bronze bars, rods and rounds are available for custom casting and machining applications. Contact Lawton AIABar for C95500 stock sized to your project requirements.
Tubes and Piping
Lawton AIABar supplies CDA 955 bronze tubing and piping for customers throughout Wisconsin and across the United States. Whether you need custom-cast pipe or tubing cut to specific dimensions, we can provide C95500 material suited to your production needs.
CDA 955 Bronze Components and Applications
The higher nickel content of CDA 955 nickel-aluminum bronze contributes to its strength, wear resistance and suitability for demanding components. Common applications include:
- Welding jaws
- Wear plates
- Valve components
- Pistons
- Bushings
- Bearings
Our Waukesha, Wisconsin, facility can machine custom bronze components from CDA 955 bars, tubes and pipes. Lawton AIABar supplies raw stock, pre-machined material and finished components for customers across the United States and worldwide.
